FOSMS

Download Datenblatt: 
Electromagnetic Stationary Field Single-Face Clutch

Pole face friction clutch with diaphragm plate to be screwed on the free wheeling gear part.

For dry operation, coil voltage 24 V DC

  • Speed changing clutch for precise operation cycle control.
  • With diaphragm made of hardened spring steel.
  • Self-acting adjustment by magnetic flux permeated friction faces.
  • No idling torque because of complete disconnection of the drive transmission in disengaged position.
  • Vertical mounting, only when ordered with application guidelines.

The diaphragm permits a free of backlash and friction less clutch operation, thereby allowing a constant repeatable time response. Within the life span of the friction faces the clutch does not require any maintenance. The diaphragm connected with the armature plate has to be screwed to the gear part to be coupled - see example shown in the drawing.

The air gap " i " given in the table must be set during the installation of the clutch to the prescribed value.

Type of actuation: 
elektromagnetisch
Lauf: 
Trockenlauf

Produktgruppe

Art

Übertragungsart

Actuation

Lauf

Ausführung

Normalstellung

Spannung

Baulänge

ranges from 50 mm to 57 mm

Drehmoment dynamisch

ranges from 12 Nm to 12 Nm

Drehmoment statisch

ranges from 12 Nm to 20 Nm

Außendurchmesser

ranges from 86 mm to 135 mm

Bohrungsdurchmesser

ranges from 12 mm to 25 mm

Bohrungsdurchmesser Toleranz